Intake System
On-vehicle InspectionON-VEHICLE INSPECTIONPROCEDURE1. INSPECT INTAKE AIR CONTROL VALVE (a) Remove the V-bank cover. (b) Start the engine.
(d) Disconnect the VSV connector, and check that the actuator rod returns. If the operation is not as specified, inspect the intake air control valve, VSV and ECM. (e) Connect the VSV connector. (f) Install the V-bank cover. 2. INSPECT INTAKE AIR CONTROL VALVE
3. CHECK AIR INDUCTION SYSTEM HINT:
(a) Check that the hoses are installed correctly. (b) Check for cracks, etc. in the hoses.
Parts LocationPARTS LOCATIONILLUSTRATION
System DiagramSYSTEM DIAGRAM ![]() |


