Low Pitched Horn
ComponentsCOMPONENTSILLUSTRATION
InspectionINSPECTIONPROCEDURE1. INSPECT LOW PITCHED HORN ASSEMBLY
(a) Apply battery voltage and check operation of the low pitched horn assembly, as shown in the table. OK:
If the result is not as specified, replace the low pitched horn assembly. InstallationINSTALLATIONPROCEDURE1. INSTALL LOW PITCHED HORN ASSEMBLY (a) Install the low pitched horn assembly with the bolt. Torque: 20 N·m {199 kgf·cm, 14 ft·lbf} (b) Connect the connector. 2. INSTALL RADIATOR GRILLE SUB-ASSEMBLY Click here RemovalREMOVALPROCEDURE1. REMOVE RADIATOR GRILLE SUB-ASSEMBLY Click here 2. REMOVE LOW PITCHED HORN ASSEMBLY
(a) Disconnect the connector. (b) Remove the bolt and low pitched horn assembly. |
