Vehicle Interior

On-vehicle Inspection

~1min read

ON-VEHICLE INSPECTION

PROCEDURE

1. CHECK LOWER NO. 2 INSTRUMENT PANEL AIRBAG ASSEMBLY (VEHICLE NOT INVOLVED IN COLLISION)

(a) Perform a diagnostic system check (See page ).

(b) With the lower No. 2 instrument panel airbag installed on the vehicle, perform a visual check. If there are any defects as mentioned below, replace the lower No. 2 instrument panel airbag with a new one:

Cuts, minute cracks or marked discoloration on the lower No. 2 instrument panel airbag.

2. CHECK LOWER NO. 2 INSTRUMENT PANEL AIRBAG ASSEMBLY (VEHICLE INVOLVED IN COLLISION AND AIRBAG HAS NOT DEPLOYED)

(a) Perform a diagnostic system check (See page ).

(b) With the lower No. 2 instrument panel airbag removed from the vehicle, perform a visual check. If there are any defects as mentioned below, replace the lower No. 2 instrument panel airbag with a new one:

  • Cuts, minute cracks or marked discoloration on the lower No. 2 instrument panel airbag.
  • Cracks or other damage to the connector.
  • Deformation or cracks on the instrument panel reinforcement.

CAUTION:

For removal and installation procedures of the lower No. 2 instrument panel airbag, be sure to follow the correct procedure.