(d) Attach the 4 claws to install the outer rear view mirror sub-assembly LH.
NOTICE:
Push the mirror downward until a "snap" sound is heard.
Removal
REMOVAL
HINT:
Use the same procedure for the RH and LH sides.
The procedure listed below is for the LH side.
PROCEDURE
1. REMOVE OUTER REAR VIEW MIRROR SUB-ASSEMBLY LH
(a) Push the upper part of the mirror surface and tilt it.
(b) Using moulding remover D, push the bottom of the outer rear view mirror sub-assembly LH upwards as shown in the illustration. Slide the outer rear view mirror sub-assembly LH upwards to detach the 4 claws, and then remove the outer rear view mirror sub-assembly LH.
Text in Illustration
*1
Moulding Remover D
*2
Protective Tape
HINT:
Apply protective tape to the outer rear view mirror assembly LH to prevent it from being damaged.
(c) w/ Mirror Heater:
Disconnect the 2 connectors and remove the outer rear view mirror sub-assembly LH.
(d) w/ Retract Mirror:
Disconnect the 3 connectors and remove the outer rear view mirror sub-assembly LH.
(e) w/ Blind Spot Monitor:
Using a screwdriver, disconnect the 3 connectors and remove the outer rear view mirror sub-assembly LH.