Engine, Hybrid System

Reassembly

~1min read
7special tools
0120240360480600382282N·mlb·ft
Tightening torque found on this page

REASSEMBLY

NOTICE:

Do not allow foreign matter, etc. to contact the ABS rotor bearing.

PROCEDURE

1. INSTALL PLUG (for 2WD)

(a) Using the SST and a hammer, install a new plug.

SST: 09950-60010

09951-00450

SST: 09950-70010

09951-07100

2. INSTALL FRONT AXLE HUB OIL SEAL

(a) Using SST and a press, press in a new oil seal.

SST: 09608-36010

SST: 09950-70010

09951-07100

NOTICE:

Do not damage the oil seal.

3. INSTALL FRONT AXLE WITH ABS ROTOR BEARING ASSEMBLY

(a) Using SST and a press, press in a new bearing.

SST: 09608-32010

NOTICE:

  • Insert 4 bolts into the bearing before installing the axle hub.
  • Make sure to securely fit the bearing to the axle hub.

4. INSTALL FRONT WHEEL ADJUSTING NUT (for 2WD)

(a) Using SST, install a new adjusting nut.

SST: 09602-60010

Torque:

382 N·m {3895 kgf·cm, 282 ft·lbf}