Engine, Hybrid System

Removal

~1min read

REMOVAL

PROCEDURE

1. PRECAUTION

NOTICE:

After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work (See page ).

2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

3. REMOVE EXHAUST MANIFOLD SUB-ASSEMBLY RH

(a) Remove the exhaust manifold RH (See page ).

4. REMOVE STARTER COVER

(a) Remove the 3 bolts and starter cover.

5. REMOVE STARTER ASSEMBLY

(a) Disconnect the 2 wire harness clamps.

(b) Disconnect the starter connector.

(c) Remove the nut and disconnect the starter wire.

(d) Remove the 2 bolts and starter.

(e) Remove the flywheel housing side cover.