REMOVAL
PROCEDURE
1. PLACE FRONT WHEELS FACING STRAIGHT AHEAD
2. REMOVE FRONT WHEELS
3. DISCONNECT NO. 2 STEERING INTERMEDIATE SHAFT SUB-ASSEMBLY
(a) Put matchmarks on the No. 2 steering intermediate shaft and the power steering gear. |
 |
(b) Remove the bolt and disconnect the No. 2 steering intermediate shaft from the power steering gear.
4. DISCONNECT TIE ROD END SUB-ASSEMBLY LH
(a) Remove the cotter pin and nut.
(b) Using SST, disconnect the tie rod end LH from the steering knuckle.
SST: 09610-20012
NOTICE:
- Hang SST with a string, etc. to prevent it from falling.
- Do not damage the front disc brake dust cover.
- Do not damage the ball joint dust cover.
- Do not damage the steering knuckle.
|
 |
5. DISCONNECT TIE ROD END SUB-ASSEMBLY RH
HINT:
Use the same procedures described for the LH side.
6. REMOVE TIE ROD END SUB-ASSEMBLY LH
HINT:
Only remove the tie rod end sub-assembly LH. The tie rod end sub-assembly RH does not need to be removed.
(a) Put matchmarks on the tie rod assembly LH, lock nut and steering rack end sub-assembly. |
 |
(b) Remove the tie rod assembly LH and lock nut.
7. REMOVE NO. 1 ENGINE UNDER COVER
Click here 
8. REMOVE FRONT DIFFERENTIAL CARRIER ASSEMBLY
Click here 
9. REMOVE POWER STEERING GEAR ASSEMBLY
(a) Remove the 2 bolts, 2 nuts and power steering gear.
(b) Using a union nut wrench, disconnect the pressure feed tube (return tube side) from the power steering gear.
NOTICE:
Do not damage the pressure feed tube.
HINT:
Move the steering gear until it reaches a position where the pressure feed tube can be removed, and then perform the procedure. |
 |
(c) Using a union nut wrench, disconnect the pressure feed tube (pressure feed tube side) from the power steering gear.
NOTICE:
Do not damage the pressure feed tube.
HINT:
Move the steering gear until it reaches a position where the pressure feed tube can be removed, and then perform the procedure. |
 |
(d) Remove the 2 bolts and disconnect the pressure feed tube clamp.
NOTICE:
Do not damage the pressure feed tube. |
 |
(e) Pull the power steering gear assembly out of the vehicle in the order shown in the illustration.
 |
Remove in this Direction (1) |
 |
Remove in this Direction (2) |
|