REMOVAL
PROCEDURE
1. REMOVE UPPER REAR CONSOLE PANEL SUB-ASSEMBLY
2. REMOVE UPPER CONSOLE PANEL SUB-ASSEMBLY
3. REMOVE CONSOLE BOX BEZEL
(a) Disconnect the connector.
(b) Using a screwdriver, detach the 5 claws and remove the console box bezel.
HINT:
Tape the screwdriver tip before use. Text in Illustration |
 |
4. REMOVE POWER OUTLET SOCKET ASSEMBLY
(a) Using a screwdriver, detach the claw and remove the power outlet socket assembly.
HINT:
Tape the screwdriver tip before use. Text in Illustration |
 |
5. REMOVE POWER OUTLET SOCKET COVER
(a) Detach the 2 claws and remove the power outlet socket cover. |
 |
6. REMOVE REAR CONSOLE END PANEL SUB-ASSEMBLY (for Double Cab)
7. REMOVE POWER OUTLET SOCKET ASSEMBLY (for Double Cab)
(a) Using a screwdriver, detach the claw and remove the power outlet socket assembly.
HINT:
Tape the screwdriver tip before use. Text in Illustration |
 |
8. REMOVE POWER OUTLET SOCKET COVER (for Double Cab)
(a) Detach the 2 claws and remove the power outlet socket cover. |
 |
|
Was this page helpful?