Vehicle Interior

Removal

~1min read

REMOVAL

HINT:

  • Use the same procedure for the LH and RH sides.
  • The procedure listed below is for the LH side.

PROCEDURE

1. PRECAUTION

NOTICE:

After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work (See page ).

2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:

Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.

NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See page ).

3. REMOVE BATTERY (for LH Side)

(a) Disconnect the cable from the positive (+) battery terminal.

(b) Loosen the nut, move the stay off the battery, and remove the battery.

4. REMOVE FRONT AIRBAG SENSOR

(a) Remove the nut and front airbag sensor from the body.

(b) Disconnect the connector.