Engine, Hybrid System
Removal
In this manual: Engine, Hybrid System
~1min read
REMOVALPROCEDURE1. REMOVE NO. 1 ENGINE UNDER COVER 2. DRAIN ENGINE COOLANT 3. REMOVE V-BANK COVER SUB-ASSEMBLY 4. REMOVE AIR CLEANER ASSEMBLY 5. REMOVE INLET RADIATOR HOSE
6. REMOVE FAN SHROUD
(b) Remove the fan and generator V-belt (See page (c) Disconnect the reservoir hose from the upper radiator tank.
(e) Remove the 4 nuts of the fluid coupling fan, and then remove the shroud together with the fluid coupling fan. NOTICE: Be careful not to damage the radiator core. (f) Remove the fan pulley from the fan bracket. 7. REMOVE FAN
|
Was this page helpful?



