Audio, Visual, Telematics
Television Camera
In this manual: Audio, Visual, Telematics
~1min read
ComponentsCOMPONENTSILLUSTRATION
InstallationINSTALLATIONHINT: A bolt without a torque specification is shown in the standard bolt chart (see page PROCEDURE1. INSTALL TELEVISION CAMERA ASSEMBLY (a) Install the television camera assembly with the 2 bolts. (b) Connect the television camera connector. 2. INSTALL TAIL GATE SERVICE HOLE COVER 3. CHECK TELEVISION CAMERA ASSEMBLY ANGLE
RemovalREMOVALPROCEDURE1. REMOVE TAIL GATE SERVICE HOLE COVER 2. REMOVE TELEVISION CAMERA ASSEMBLY
(a) Disconnect the television camera connector. (b) Remove the 2 bolts and television camera assembly. |
Was this page helpful?


