1. CHECK OCCUPANT CLASSIFICATION ECU
Terminal No. (Symbols) | Wiring Color | Terminal Description | Condition | Specification |
Y2-1 (+B) - Y2-3 (GND) |
W - W-B |
Battery |
Ignition switch ON |
11 to 14 V |
Y2-2 (DIA) - Y2-3 (GND) |
GR - W-B |
Diagnosis (DLC3) |
Ignition switch ON |
Pulse generation |
Y2-3 (GND) - Body ground |
W-B - Body ground |
Ground |
Always |
Below 1 Ω |
Y2-4 (FSR-) - Y2-3 (GND) |
Y - W-B |
Center airbag sensor communication ground line |
Always |
Below 1 Ω |
Y2-5 (BGND) - Y2-3 (GND) |
P - W-B |
Passenger side buckle switch ground line |
Always |
Below 1 Ω |
Y2-7 (IG2) - Y2-3 (GND) |
B - W-B |
Power source (IGN fuse) |
Ignition switch ON |
11 to 14 V |
Y2-8 (FSR+) - Y2-4 (FSR-) |
L - Y |
Center airbag sensor communication line |
Ignition switch ON |
Pulse generation |
Y2-9 (BSW) - Y2-5 (BGND) |
G - P |
Passenger side buckle switch line |
Ignition switch ON, buckle switch ON |
0.12 to 0.18 A |
Ignition switch ON, buckle switch OFF |
0.4 to 0.7 mA |
Y1-1 (SGD1) - Y2-3 (GND) |
G - W-B |
Front occupant detection sensor LH ground line |
Always |
Below 1 Ω |
Y1-2 (SGD2) - Y2-3 (GND) |
O - W-B |
Front occupant detection sensor RH ground line |
Always |
Below 1 Ω |
Y1-3 (SGD3) - Y2-3 (GND) |
W - W-B |
Rear occupant detection sensor LH ground line |
Always |
Below 1 Ω |
Y1-4 (SGD4) - Y2-3 (GND) |
BR - W-B |
Rear occupant detection sensor RH ground line |
Always |
Below 1 Ω |
Y1-11 (SVC1) - Y1-1 (SGD1) |
R - G |
Front occupant detection sensor LH power supply line |
Ignition switch ON, load is applied to front occupant detection sensor LH |
4.5 to 5.1 V |
Y1-12 (SVC2) - Y1-2 (SGD2) |
W - O |
Front occupant detection sensor RH power supply line |
Ignition switch ON, load is applied to front occupant detection sensor RH |
4.5 to 5.1 V |
Y1-5 (SVC3) - Y1-3 (SGD3) |
GR - W |
Rear occupant detection sensor LH power supply line |
Ignition switch ON, load is applied to rear occupant detection sensor LH |
4.5 to 5.1 V |
Y1-6 (SVC4) - Y1-4 (SGD4) |
V - BR |
Rear occupant detection sensor RH power supply line |
Ignition switch ON, load is applied to rear occupant detection sensor RH |
4.5 to 5.1 V |
Y1-7 (SIG1) - Y1-1 (SGD1) |
P - G |
Front occupant detection sensor LH signal line |
Ignition switch ON, load is applied to front occupant detection sensor LH |
Pulse generation |
Y1-8 (SIG2) - Y1-2 (SGD2) |
L - O |
Front occupant detection sensor RH signal line |
Ignition switch ON, load is applied to front occupant detection sensor RH |
Pulse generation |
Y1-9 (SIG3) - Y1-3 (SGD3) |
Y - W |
Rear occupant detection sensor LH signal line |
Ignition switch ON, load is applied to rear occupant detection sensor LH |
Pulse generation |
Y1-10 (SIG4) - Y1-4 (SGD4) |
B - BR |
Rear occupant detection sensor RH signal line |
Ignition switch ON, load is applied to rear occupant detection sensor RH |
Pulse generation |