Vehicle Interior

Washer Nozzle

~1min read

Adjustment

ADJUSTMENT

PROCEDURE

1. ADJUST WASHER NOZZLE SUB-ASSEMBLY

(a) Using a screwdriver, detach the 2 claws and separate the washer nozzle.

NOTICE:

Be careful not to damage the windshield.

(b) Remove the washer nozzle from the washer hose.

NOTICE:

Washer nozzles cannot be reused.

(c) Select a washer nozzle so that the spray is within the standard contact areas. Replace the washer nozzle with the selected one.

On-vehicle Inspection

ON-VEHICLE INSPECTION

PROCEDURE

1. REMOVE WASHER NOZZLE SUB-ASSEMBLY

(a) With the engine running, check that the center stream of washer fluid sprays on the windshield within the hatched areas shown in the illustration.

Standard:

Washer fluid hits the windshield in the areas shown in the illustration.

If the result is not as specified, replace the washer nozzle.