Brake System (other)
Brake Line
In this manual: Brake System (other)
~2min read
Precaution PRECAUTION

1. TROUBLESHOOTING PRECAUTION
NOTICE:
- Since the brake lines are critical safety related parts, be sure to disassemble and inspect the components if a brake fluid leak is found. If any abnormality is found, replace the component with a new one.
- When removing brake components, cover the brake line connections to prevent foreign matter such as dust or dirt from entering the lines.
- Do not damage or deform the brake lines during the removal and installation procedures.
- When installing a grommet to the body, ensure that the brake line passes through the center of the grommet.
- When installing a brake line or flexible hose, ensure that they are free from twists or bends.
- If the metal end of a flexible hose does not match the groove on the bracket, twist the hose slightly to insert it.
- Flexible hoses must be free from shock absorber oil, grease, etc.
- When installing a brake line to a plastic clamp, ensure that the brake line is not loose or pinched.
- Do not reuse any clips or plastic clamps removed from a flexible hose.
- After installing a brake line or flexible hose, ensure that they do not interfere with any other components or body.
- Do not allow brake fluid on any painted vehicle body surface. If brake fluid leaks onto any painted surface, immediately wash it off.
- When disconnecting and connecting a flexible hose and brake line:
- Hold the flexible hose with a wrench and disconnect the brake tube using a union nut wrench without deforming the tube.
- Remove the clip and disconnect the flexible hose.
- Secure the flexible hose with a new clip. At this time, be sure to securely install the clip.
- Connect the brake tube using a union nut wrench without deforming the tube.
- When connecting a brake line and way:
Text in illustration
*1
Hold
*2
Turn
- Support the way to prevent the brake tubes from being deformed and connect each brake tube using a union nut wrench.
- Support the way to prevent the brake lines from being deformed and install the way to the vehicle body with the bolt.

Test yourself
A quick Toyota Venza quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?