Toyota Venza Quiz
Supplemental Restraint Systems

Center Airbag Sensor Assembly Malfunction (B1000/31)

In this manual: Supplemental Restraint Systems
Introduction — 15Maintenance — 8Audio / Video — 102Garage Door Opener — 8Navigation / Multi Info Display — 81Park Assist / Monitoring — 50Brake (front) — 7Brake (rear) — 7Brake Control / Dynamic Control Systems — 79Brake System (other) — 28Parking Brake — 22Axle And Differential — 44Drive Shaft / Propeller Shaft — 24Mf1a Transfer / 4wd / Awd — 46U660e Automatic Transmission / Transaxle — 1241ar-fe Cooling — 311ar-fe Emission Control — 101ar-fe Engine Control — 1331ar-fe Engine Mechanical — 441ar-fe Fuel — 311ar-fe Intake / Exhaust — 211ar-fe Lubrication — 111ar-fe Starting — 16Cruise Control — 241ar-fe Battery / Charging — 162gr-fe Battery / Charging — 17Networking — 67Power Distribution — 8Power Assist Systems — 34Steering Column — 37Steering Gear / Linkage — 29Alignment / Handling Diagnosis — 4Front Suspension — 39Rear Suspension — 35Tire / Wheel — 4Tire Pressure Monitoring — 35Door / Hatch — 83Exterior Panels / Trim — 56Horn — 4Lighting (ext) — 89Mirror (ext) — 36Sliding Roof / Convertible — 26Window / Glass — 87Wiper / Washer — 30Door Lock — 85Heating / Air Conditioning — 82Interior Panels / Trim — 20Lighting (int) — 37Meter / Gauge / Display — 41Mirror (int) — 9Power Outlets (int) — 10Seat — 84Seat Belt — 43Supplemental Restraint Systems — 131Theft Deterrent / Keyless Entry — 155
~1min read
DESCRIPTION

The center airbag sensor assembly consists of a deceleration sensor, safing sensor, drive circuit, diagnosis circuit, ignition control, etc.

If the center airbag sensor assembly receives signals from the deceleration sensor, it determines whether or not the SRS should be activated.

DTC B1000/31 is stored when a malfunction is detected in the center airbag sensor assembly.

DTC No.

DTC Detection Condition

Trouble Area

B1000/31

Center airbag sensor assembly malfunction

Center airbag sensor assembly
PROCEDURE

  1. CHECK DTC

(a) Check for DTCs (See page ).


Result

Result

Proceed to

DTC B1000/31 is output

A

DTC B1000/31 and other DTCs are output

B

NOTICE:

If only DTC B1000/31 is output, do not clear the DTCs, replace the center airbag sensor assembly.

HINT:

If any DTCs other than DTC B1000/31 are also output, troubleshoot those DTCs first.


A

REPLACE CENTER AIRBAG SENSOR ASSEMBLY

B

GO TO DIAGNOSTIC TROUBLE CODE CHART

Test yourself

A quick Toyota Venza quiz: every answer comes with an explanation and a link to the manual page.