Steering Gear / Linkage

Disassembly

~1min read
DISASSEMBLY PROCEDURE

1. REMOVE STEERING RACK BOOT CLIP (for LH Side)

(a) Using pliers, remove the steering rack boot clip.

2. REMOVE STEERING RACK BOOT CLIP (for RH Side)

HINT:

Perform the same procedure as for the LH side.

3. REMOVE NO. 2 STEERING RACK BOOT CLAMP

(a) Using a screwdriver, remove the No. 2 steering rack boot clamp.

NOTICE:

Be careful not to damage the steering rack boot.

4. REMOVE NO. 1 STEERING RACK BOOT CLAMP

HINT:

Perform the same procedure as for the No. 2 steering rack boot clamp.

5. REMOVE NO. 2 STEERING RACK BOOT

6. REMOVE NO. 1 STEERING RACK BOOT

Test yourself

A quick Toyota Venza quiz: every answer comes with an explanation and a link to the manual page.