Interior Panels / Trim

Disassembly

~1min read
DISASSEMBLY PROCEDURE

1. REMOVE NO. 1 SIDE DEFROSTER NOZZLE DUCT

(a) Remove the 2 screws <E> or <F> and remove the No. 1 side defroster nozzle duct.

2. REMOVE NO. 2 SIDE DEFROSTER NOZZLE DUCT

(a) Remove the 2 screws <E> or <F> and remove the No. 2 side defroster nozzle duct.

3. REMOVE DEFROSTER NOZZLE ASSEMBLY

(a) Remove the 4 screws <E> or <F> and remove the defroster nozzle assembly.

4. REMOVE HEATER TO REGISTER DUCT

(a) Remove the 7 screws <E> or <F> and remove the heater to register duct.


5. REMOVE NO. 1 ANTENNA CORD SUB-ASSEMBLY


6. REMOVE NAVIGATION ANTENNA ASSEMBLY (w/ Navigation System)


7. REMOVE NO. 3 INSTRUMENT PANEL WIRE

(a) Disengage the 4 clamps and remove the No. 3 instrument panel wire.

8. REMOVE FRONT PASSENGER AIRBAG ASSEMBLY


9. REMOVE GLOVE BOX LIGHT ASSEMBLY

(a) Disengage the 2 claws and remove the glove box light assembly.

10. REMOVE NO. 1 INSTRUMENT PANEL PIN

(a) Remove the 2 screws <E> or <F> and the 2 No. 1 instrument panel pins.

Test yourself

A quick Toyota Venza quiz: every answer comes with an explanation and a link to the manual page.