Head restraints

Head restraints are provided for all seats.

► Front and rear outboard seats

Vertical adjustment 1. Up Pull the head restraint up.

2. Down
Push the head restraints down while pressing the lock release button.

► Rear center seat (fabric seat)

Vertical adjustment 1. Down 2. Up

Push the head restraint up or down while pressing the lock release button.

► Rear center seat (leather seat)

Vertical adjustment 1. Down Push the head restraint down while pressing the lock release button.

2. Up
Pull the head restraint up.

- Adjusting the height of the head restraints

Make sure that the head restraints are adjusted so that the center of the head restraint is closest to the top of your ears.

- Adjusting the rear center seat head restraint

Always raise the head restraint one level from the stowed position when using.

- Removing the head restraints

Pull the head restraint up while pressing the lock release button.

- Installing the head restraints

Align the head restraint with the installation holes and push it down to the lock position.

Press and hold the lock release button when lowering the head restraint.

CAUTION - Head restraint precautions Observe the following precautions regarding the head restraints. Failure to do so may result in death or serious injury. • Use the head restraints designed for each respective seat. • Adjust the head restraints to the correct position at all times. • After adjusting the head restraints, push down on them and make sure they are locked in position.

• Do not drive with the head restraints removed.