Toyota Venza Quiz
Drive Shaft / Propeller Shaft

Inspection

In this manual: Drive Shaft / Propeller Shaft
Introduction — 15Maintenance — 8Audio / Video — 102Garage Door Opener — 8Navigation / Multi Info Display — 81Park Assist / Monitoring — 50Brake (front) — 7Brake (rear) — 7Brake Control / Dynamic Control Systems — 79Brake System (other) — 28Parking Brake — 22Axle And Differential — 44Drive Shaft / Propeller Shaft — 24Mf1a Transfer / 4wd / Awd — 46U660e Automatic Transmission / Transaxle — 1241ar-fe Cooling — 311ar-fe Emission Control — 101ar-fe Engine Control — 1331ar-fe Engine Mechanical — 441ar-fe Fuel — 311ar-fe Intake / Exhaust — 211ar-fe Lubrication — 111ar-fe Starting — 16Cruise Control — 241ar-fe Battery / Charging — 162gr-fe Battery / Charging — 17Networking — 67Power Distribution — 8Power Assist Systems — 34Steering Column — 37Steering Gear / Linkage — 29Alignment / Handling Diagnosis — 4Front Suspension — 39Rear Suspension — 35Tire / Wheel — 4Tire Pressure Monitoring — 35Door / Hatch — 83Exterior Panels / Trim — 56Horn — 4Lighting (ext) — 89Mirror (ext) — 36Sliding Roof / Convertible — 26Window / Glass — 87Wiper / Washer — 30Door Lock — 85Heating / Air Conditioning — 82Interior Panels / Trim — 20Lighting (int) — 37Meter / Gauge / Display — 41Mirror (int) — 9Power Outlets (int) — 10Seat — 84Seat Belt — 43Supplemental Restraint Systems — 131Theft Deterrent / Keyless Entry — 155
~1min read
INSPECTION PROCEDURE

1. INSPECT FRONT DRIVE SHAFT ASSEMBLY

(a) Check whether the drive shaft dimensions are within the following specifications.

Text in Illustration

*A

LH

*B

RH

HINT:

The following table shows the dimension (A) of the drive shaft.

Dimension (A) for 1AR-FE

for 2WD

LH

533.46 to 537.46 mm (1.751 to 1.763 ft.)

RH

539.96 to 543.96 mm (1.772 to 1.784 ft.)

for AWD

LH

533.46 to 537.46 mm (1.751 to 1.763 ft.)

RH

570.96 to 574.96 mm (1.874 to 1.886 ft.)
Dimension (A) for 2GR-FE

for 2WD

LH

535.54 to 539.54 mm (1.758 to 1.770 ft.)

RH

542.64 to 546.64 mm (1.781 to 1.793 ft.)

for AWD

LH

535.54 to 539.54 mm (1.758 to 1.770 ft.)

RH

572.64 to 576.64 mm (1.879 to 1.891 ft.)

(b) Check that there is no excessive play in the outboard joint.

(c) Check that the inboard joint slides smoothly in the thrust direction.

(d) Check that there is no excessive play in the radial direction of the inboard joint.

(e) Check the boots for damage.

Test yourself

A quick Toyota Venza quiz: every answer comes with an explanation and a link to the manual page.