Rear Suspension
Removal
In this manual: Rear Suspension
~1min read
REMOVAL CAUTION / NOTICE / HINT
HINT:
- Use the same procedure for the RH side and LH side.
- The procedure listed below is for the LH side.
1. REMOVE REAR WHEEL
2. SEPARATE NO. 3 PARKING BRAKE CABLE ASSEMBLY
(a) Remove the bolt and separate the No. 3 parking brake cable assembly. |
![]() |
3. REMOVE REAR STRUT ROD ASSEMBLY (for 2WD)
(a) Remove the 2 bolts, the 2 nuts and the rear strut rod assembly. NOTICE: Since stopper nuts are used, loosen the bolts. |
![]() |
4. REMOVE REAR STRUT ROD ASSEMBLY (for AWD)
(a) Remove the 2 bolts, the 2 nuts and the rear strut rod assembly. NOTICE: Since stopper nuts are used, loosen the bolts. |
![]() |
Test yourself
A quick Toyota Venza quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?


