Removal

REMOVAL PROCEDURE

1. REMOVE REAR DOOR SCUFF PLATE RH

HINT:

Use the same procedure for the RH side and the LH side (See page ).

2. REMOVE REAR DOOR OPENING TRIM WEATHERSTRIP RH

HINT:

Use the same procedure for the RH side and the LH side (See page ).

3. REMOVE TONNEAU COVER ASSEMBLY (w/ Tonneau Cover)

4. REMOVE DECK BOARD ASSEMBLY

5. REMOVE NO. 3 DECK BOARD SUB-ASSEMBLY

6. REMOVE DECK SIDE TRIM BOX LH

7. REMOVE NO. 2 DECK BOARD SUB-ASSEMBLY

8. REMOVE DECK SIDE TRIM BOX RH

9. REMOVE NO. 1 DECK BOARD

10. REMOVE REAR SEAT SUB FLOOR PANEL ASSEMBLY

11. REMOVE REAR FLOOR FINISH PLATE

12. REMOVE REAR SEAT HEADREST ASSEMBLY

13. REMOVE REAR SEAT CENTER HEADREST ASSEMBLY

14. REMOVE REAR SEAT INNER TRACK BRACKET COVER

15. REMOVE REAR SEAT OUTER TRACK BRACKET COVER

16. DISCONNECT REAR SEAT RECLINING CONTROL CABLE

17. REMOVE REAR SEAT ASSEMBLY RH

18. REMOVE RECLINING REMOTE CONTROL BEZEL RH

HINT:

Use the same procedure for the RH side and the LH side (See page ).

19. REMOVE LUGGAGE HOLD BELT STRIKER ASSEMBLY

HINT:

Use the same procedure for the RH side and the LH side (See page ).

20. DISCONNECT REAR SEAT OUTER BELT ASSEMBLY RH

HINT:

Use the same procedure for the RH side and the LH side (See page ).

21. REMOVE DECK TRIM SIDE PANEL ASSEMBLY RH

22. REMOVE REAR POWER POINT SOCKET ASSEMBLY

(a) Using a screwdriver, disengage the 2 claws and remove the rear power point socket assembly as shown in the illustration. Text in Illustration *1 Protective Tape HINT: Tape the screwdriver tip before use.

23. REMOVE REAR POWER POINT SOCKET COVER

(a) Disengage the 2 claws and remove the rear power point socket cover.