Electrical system

Adjusting wiper arm

~1min read

Special tools and workshop equipment required

Torque wrench -V.A.G 1331-

  • Remove wiper arm → Chapter.
  • Switch on ignition.
  • Actuate “rear window wipe” function and allow wiper shaft to move to its end position.
  • Switch off ignition.
  • Fit wiper arm together with attached wiper blade onto wiper shaft.
Adjusting wiper arm
  • Align wiper blade as follows against the rear window:
Note The dimension given here indicates the distance between the tip of the wiper blade and the bottom edge of the rear window.

Dimension -a - = 33 + 5 mm.

  • Tighten wiper arm nut.
  • Switch on ignition.
  • Actuate “rear window wipe” function and allow wiper arm to move to its end position.
  • Check wiper arm adjustment again and correct if necessary.

Specified torques

→ Chapter „Assembly overview - rear window wiper system“

Adjusting wiper arm

Test yourself

A quick Volkswagen Golf quiz: every answer comes with an explanation and a link to the manual page.