Assembly overview - brake caliper FS III

When carrying out repairs, install all parts supplied in repair kit.

Use only methylated spirits for cleaning the brake.

Apply thin coat of lithium grease -G 052 150 A2- to brake cylinder, piston and seal.

1 -

Dust cap

Fit onto bleeder valve

2 -	Bleeder valve

Before screwing in, grease thread with thin coat of lithium grease -G 052 150 A2-

10 N·m

3 -	Bearing bush

Insert into brake caliper.

4 -

Guide pin

30 N·m

5 -	Cover caps

Insert into sleeve bearing.

6 -	Brake caliper

7 -	Sealing ring

Removing and installing → Chapter

8 -

Piston

Apply thin coat of assembly paste G 052 150 A2 to piston before installing.

Removing and installing → Chapter

7 -	Protective cap

Removing and installing → Chapter

When inserting piston, take care not to damage protective cap