Volkswagen Golf Quiz
General body repairs, interior

Assembly overview - front three-point seat belt, 2-door model

In this manual: General body repairs, interior
General body repairs, exterior — 230General body repairs, interior — 279General information, paint — 133Vechile- specific paint information — 27Heating, air conditioning — 156Auxiliary heater — 58Air conditioning system with refrigerant R134a — 1297- speed dual clutch gearbox 0CW — 544- cylinder injection engine(1.4 1 direct inction. turbocharger) — 182Fuel supply system - Petrol engines — 59Running gear, axles, steering — 221Brake system — 92Wheels and Tyres guide — 12Guide for using trailers — 11Wheels and Tyres Guide - General Information — 121Brake system (hybrid) — 73Electrical system — 326Communication — 65Electrical system, general information — 111
~2min read
010203040502015N·mlb·ft
Tightening torque found on this page
Assembly overview - front three-point seat belt, 2-door model
1 - Bolt
  • If removed due to an accident with seat belt fastened, renew bolt.
  • 20 N·m
2 - Belt end fitting
  • Removing and installing → Chapter
3 - Bolt
  • If removed due to an accident with seat belt fastened, renew bolt
  • 40 N·m
4 - Belt inertia reel
  • Driver side: with driver seat belt tensioner igniter 1 -N153- and control unit for front left belt tensioner -J854-
  • Front passenger side: with front passenger seat belt tensioner igniter 1 -N154- and control unit for front right belt tensioner -J855-.
  • Removing and installing → Chapter
  • For vehicles with control unit for front left belt tensioner -J854- or control unit for front right belt tensioner -J855-, the airbag control unit -J234- must be adapted in → Guided fault finding after renewing the seat belt. If the → Guided fault finding is already running, then refresh test plan “15 - Airbag”.
5 - Bolts
  • Qty. 2
  • 4,5 N·m
6 - Front belt guide
  • Removing and installing → Chapter
  • Observe correct installation position when installing.
7 - Bolt
  • If removed due to an accident with seat belt fastened, renew bolt.
  • 40 N·m
8 - Belt guide fitting
  • Must move to vertical position or operated position on its own after bolt has been tightened
9 - Bolt
  • If removed due to an accident with seat belt fastened, renew bolt.
  • 20 N·m
10 - Belt height adjustment
  • Removing and installing → Chapter
  • Always renew after belt tensioner has deployed with seat belt fastened
11 - Washer
12 - Bolt
  • If removed due to an accident with seat belt fastened, renew bolt
  • 40 N·m
  • Start bolt by hand when installing
13 - Retaining loop

Test yourself

A quick Volkswagen Golf quiz: every answer comes with an explanation and a link to the manual page.