Volkswagen Golf Quiz
General body repairs, exterior

Dimensions - lettering on rear lid

In this manual: General body repairs, exterior
General body repairs, exterior — 230General body repairs, interior — 279General information, paint — 133Vechile- specific paint information — 27Heating, air conditioning — 156Auxiliary heater — 58Air conditioning system with refrigerant R134a — 1297- speed dual clutch gearbox 0CW — 544- cylinder injection engine(1.4 1 direct inction. turbocharger) — 182Fuel supply system - Petrol engines — 59Running gear, axles, steering — 221Brake system — 92Wheels and Tyres guide — 12Guide for using trailers — 11Wheels and Tyres Guide - General Information — 121Brake system (hybrid) — 73Electrical system — 326Communication — 65Electrical system, general information — 111
~1min read
Note

When fitting the lettering, observe the fitting notes → Anchor.

Dimensions - lettering on rear lid
1 - Lettering
  • Model designation.
2 - Lettering
  • Engine designation
  • For technical designations without engine designation, another dimension applies.
3 - Height dimension
  • 50.5 ± 1 mm, from upper edge of lettering to tail light
  • Additional lettering is bonded 6.0 ± 1 mm under engine designation
  • The height dimension for technical designations without engine designation must measure 75.5 ± 1 mm from lower edge of lettering.
4 - Horizontal dimension
  • 29.5 ± 1 mm, from outer edge of rear lid to lettering
  • Side dimension for technical designations without engine designation must measure 29.5 ± 1 mm.
5 - Horizontal dimension
  • 26.5 ± 1 mm, from outer edge of rear lid to lettering
6 - Height dimension
  • 75.5 ± 1 mm, from lower edge of lettering to tail light

Test yourself

A quick Volkswagen Golf quiz: every answer comes with an explanation and a link to the manual page.