Wheels and Tyres Guide - General Information

Eliminating flat spots caused by storage or handling

~1min read

Eliminating flat spots caused by storage or handling

Flat spots caused by storage or handling cannot be eliminated from the tyre using workshop equipment. Flat spots caused by storage or handling can be removed only by running the tyres warm.

The method described below is not recommended in cold and wintry weather.

Requirements and conditions:

  • If necessary, check tyre pressure and correct.
  • If possible, drive the vehicle onto a motorway.
  • Traffic and road conditions permitting, drive a 20 to 30 kilometre stretch at a speed of 120 to 150 km/h.
WARNING

Do not endanger yourself or other road users during this road test.

Observe the highway code and speed limitations in force when performing the road test.
  • Jack up the vehicle immediately after the trip.
  • Unbolt wheels from vehicle.
  • Balancing wheels on stationary wheel balancer → Chapter.

Test yourself

A quick Volkswagen Golf quiz: every answer comes with an explanation and a link to the manual page.