Fuel supply system - Petrol engines
General notes
In this manual: Fuel supply system - Petrol engines
~1min read
Cleanliness specifications for working on the auxiliary heater and fuel systemWhen working on the fuel supply and injection system, pay careful attention to the following “rules”:Thoroughly clean all unions and surrounding areas before disconnecting.Place removed parts on a clean surface and cover. Use only lint-free cloths.Carefully cover opened components or seal if repairs cannot be carried out immediately. Install clean components only. Do not remove replacement parts from packing until immediately before installing. Do not use parts that have not been stored in their packing (e.g. in tool boxes etc.).When the system is open: Do not work with compressed air.Do not move vehicle.Immediately seal open lines and unions with clean plugs, for example from engine bung set -VAS 6122-. Protect detached electrical connections against dirt and moisture and only connect when they are dry. |
Test yourself
A quick Volkswagen Golf quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?