General information, paint

Industrial dirt remover

~2min read

Designation:

Industrial dirt remover -ABS 600 000 10-

Issued 05.2004

Product description

The industrial dirt remover -ABS 600 000 10- is used for the removal of surface rust (metal dust) from the vehicle body. The product is applied undiluted.
Caution

The product contains organic and inorganic acids.

Be sure to always wear protective gloves and goggles when working with the product!

Technical data sheet

Note Before using, read the safety measures and recommendations in the safety data sheet. Even for products which are not required by law to be labelled, the usual safety measures for chemical products must be observed.

Application:

When using the industrial dirt remover, observe the following:

Neither the temperature of the cleaner nor that of the vehicle body must exceed 25 °C (do not expose the cleaner nor the vehicle to direct sunlight). Apply product to clean vehicle body (after car wash) using brush or sponge. Allow for a reaction time of approx. 10 minutes (the reaction time must not be exceeded to avoid damage to paintwork or plastic parts). Do not allow the product to dry on the surface.

Rinse off vehicle body with plenty of water, then wash vehicle.

Repeat the cleaning procedure if the vehicle is still not clean after the cleaner has been applied once.

Data

Chemical composition Highly effective cleaning combination of organic and inorganic acids, surfactants and water.
Colour Transparent/clear, colourless fluid
pH value 1
Density at 15 °C EN ISO 12185 1.076 ± 0.015 g/ml

Storage

The guaranteed shelf life is 36 months from date of production. If stored in sealed original container at +15 °C to +30 °C, the product must be processed at the latest by the end of the date stated on the label.
Industrial dirt remover

Test yourself

A quick Volkswagen Golf quiz: every answer comes with an explanation and a link to the manual page.