Operating and display unit

Overview of control and display unit

1 -	Heated driver seat regulator

Optional

Seat heater has 3 heat settings. Current setting is shown by LED.

If no LED is lit, seat heating is switched off.

2 -	Heated rear window button

Depending on ambient temperature, rear window heating will remain on from 4 to 20 minutes.

3 -	Air recirculation button

Note

Air recirculation mode changes to fresh air mode when ignition is switched off.

In vehicles for Japanese market, “air recirculation mode” remains unchanged when ignition is switched off.

4 -	Heated front passenger seat regulator

Optional

Seat heater has 3 heat settings. Current setting is shown by LED.

If no LED is lit, seat heating is switched off.

5 -	Rotary knob for setting air distribution

6 -	Display for air distribution

7 -	Rotary knob for setting blower speed

Left: reduce blower speed.

Right: increase blower speed.

8 -	Display for blower speed

9 -	Rotary knob for setting temperature

Left: reduce temperature.

Right: increase temperature.

10 -	Temperature setting display

Removing and installing operating and display unit Removal and installation are identical with procedure for vehicles with air conditioning system → Chapter.

Other controlling and regulating components

Removing and installing ambient temperature sensor -G17- Removal and installation are identical with procedure for vehicles with air conditioning system → Chapter.