Overview of fitting locations - components inside of front passenger compartment, RHD vehicles

1 -	Air recirculation flap control motor -V113- or fresh air/recirculated air, air flow flap control motor -V425-

Removing and installing air recirculation flap control motor -V113- → Chapter

Removing and installing fresh air/recirculated air, air flow flap control motor -V425- → Chapter.

Overview of fitting locations → Chapter

2 -	Dust and pollen filter

Removing and installing → Chapter.

3 -	Left temperature flap control motor -V158- or temperature flap control motor -V68-

Removing and installing → Chapter.

Overview of fitting locations → Chapter

4 -	Front air distribution flap control motor -V426- with air distribution flap control motor -V428-

Removing and installing → Chapter.

Overview of fitting locations → Chapter

5 -	Heat exchanger

Removing and installing → Chapter.

6 -	Sunlight penetration photosensor -G107-

Only on vehicles with Climatronic.

Removing and installing → Chapter.

7 -	Evaporator temperature sensor -G308-

Only on vehicles with air conditioning system

Checking: Use vehicle diagnostic tester in “Guided fault finding” mode and → Current flow diagrams, Electrical fault finding and Fitting locations

Removing and installing → Chapter.

8 -	Right temperature flap control motor -V159-

Only on vehicles with Climatronic.

Removing and installing → Chapter.

Overview of fitting locations → Chapter

9 -	Defroster flap control motor -V107-

Only on vehicles with Climatronic.

Removing and installing → Chapter.

Overview of fitting locations → Chapter

10 -	Footwell vent temperature sender -G192-

Only on vehicles with Climatronic.

Checking: Use vehicle diagnostic tester in “Guided fault finding” mode and → Current flow diagrams, Electrical fault finding and Fitting locations

Removing and installing → Chapter.

11 -	Footwell vent on driver side

Removing and installing → Chapter.

Assembly overview → Chapter

12 -	Right vent temperature sender -G151-

Only vehicles with Climatronic

Checking: Use vehicle diagnostic tester in “Guided fault finding” mode and → Current flow diagrams, Electrical fault finding and Fitting locations

Removing and installing → Chapter.

An incorrectly installed vent temperature sender will cause flow noise

13 -	Operating and display unit

Removing and installing → Chapter.

14 -	Evaporator

Only on vehicles with air conditioning system

Removing and installing → Chapter.

15 -	Auxiliary air heater element -Z35- with auxiliary air heater control unit -J604-

Checking → Chapter

Removing and installing → Chapter.

16 -	Condensation drain hose

Only on vehicles with air conditioning system

Checking → Chapter

Removing and installing → Chapter.

17 -	Footwell vent on front passenger side

Removing and installing → Chapter.

Assembly overview → Chapter

18 -	Fresh air blower -V2-

Removing and installing → Chapter.

19 -	Left vent temperature sender -G150-

Only vehicles with Climatronic

Checking: Use vehicle diagnostic tester in “Guided fault finding” mode and → Current flow diagrams, Electrical fault finding and Fitting locations

An incorrectly installed vent temperature sender will cause flow noise

Removing and installing → Chapter.