Volkswagen Golf Quiz
Brake system (hybrid)

Overview of fitting locations - parking brake

In this manual: Brake system (hybrid)
General body repairs, exterior — 230General body repairs, interior — 279General information, paint — 133Vechile- specific paint information — 27Heating, air conditioning — 156Auxiliary heater — 58Air conditioning system with refrigerant R134a — 1297- speed dual clutch gearbox 0CW — 544- cylinder injection engine(1.4 1 direct inction. turbocharger) — 182Fuel supply system - Petrol engines — 59Running gear, axles, steering — 221Brake system — 92Wheels and Tyres guide — 12Guide for using trailers — 11Wheels and Tyres Guide - General Information — 121Brake system (hybrid) — 73Electrical system — 326Communication — 65Electrical system, general information — 111
~1min read
0102030405086N·mlb·ft
Tightening torque found on this page
Overview of fitting locations - parking brake
1 - Hexagon socket head bolt

8 N·m

2 - Parking brake motor

Left parking brake motor -V282-, fitting location: on rear left brake caliper

Right parking brake motor -V283-, fitting location: on rear right brake caliper

Removing and installing → Chapter

3 - Control unit for electromechanical parking brake -J540-

Integrated into ABS control unit -J104- and cannot be renewed individually

Removing and installing ABS control unit -J104- → Chapter

4 - Auto-hold button -E540-

With auto-hold warning lamp -K237-

Location: in centre console.

Removing and installing → Electrical system; Rep. gr.96

5 - Electromechanical parking brake button -E538-

With electromechanical parking brake warning lamp -K213-

Location: in centre console.

Removing and installing → Electrical system; Rep. gr.96

6 - Dash panel insert

With brake system warning lamp -K118-

With electric parking brake and handbrake fault warning lamp -K214-

7 - Nut

Not fitted

8 - Rear brake caliper
9 - Sealing ring

Renew

Removing and installing control unit for electromechanical parking brake -J540-

The control unit for electromechanical parking brake -J540- is integrated into the ABS control unit -J104- and cannot be renewed individually.
  • Removing and installing ABS control unit -J104- → Chapter.

Test yourself

A quick Volkswagen Golf quiz: every answer comes with an explanation and a link to the manual page.