Removing and installing aerial amplifier -R24-/-R93-/-R84-
In this manual: Communication
~1min read
Tightening torque found on this page
Special tools and workshop equipment required
Torque wrench -V.A.G 1783-
Note Removal and installation of aerial amplifier -R24- are described. Removal and installation of aerial amplifier 2 -R93- and aerial amplifier 3 -R84- are carried out in the same way.
Removing
Switch off ignition and all electrical consumers, and remove ignition key.
Aerial amplifier -R24-/aerial amplifier 3 -R84- is located on top left of rear lid.
Remove rear lid trim (top) → General body repairs, interior; Rep. gr.70.
Aerial amplifier 2 -R83- is located on bottom right of rear lid.
Remove rear lid trim (bottom) → General body repairs, interior; Rep. gr.70.
Release and detach connectors -arrows- on aerial amplifier -R24-.
Loosen securing bolt -arrow-.
Pull out bolt with plate clamp and aerial amplifier -R24-.
Push aerial amplifier -R24- in direction of arrow.
Remove aerial amplifier -R24-.
Installing
Install in the reverse order of removal. When doing this, note the following:
Specified torques
Component
Specified torque
Bolt on aerial amplifier -R24-
2 N·m
?
Test yourself
A quick Volkswagen Golf quiz: every answer comes with an explanation and a link to the manual page.
Note Removal and installation of aerial amplifier -R24- are described. Removal and installation of aerial amplifier 2 -R93- and aerial amplifier 3 -R84- are carried out in the same way. 
