Volkswagen Golf Quiz
Electrical system

Removing and installing bulb for number plate light -X4-/-X5-

In this manual: Electrical system
General body repairs, exterior — 230General body repairs, interior — 279General information, paint — 133Vechile- specific paint information — 27Heating, air conditioning — 156Auxiliary heater — 58Air conditioning system with refrigerant R134a — 1297- speed dual clutch gearbox 0CW — 544- cylinder injection engine(1.4 1 direct inction. turbocharger) — 182Fuel supply system - Petrol engines — 59Running gear, axles, steering — 221Brake system — 92Wheels and Tyres guide — 12Guide for using trailers — 11Wheels and Tyres Guide - General Information — 121Brake system (hybrid) — 73Electrical system — 326Communication — 65Electrical system, general information — 111
~1min read
Note If an LED number plate light is faulty, the entire number plate light must be renewed.

Removing:

  • Switch off ignition and all electrical consumers.
  • If ignition key is present, disengage in position 0 (locked).
  • Remove number plate light → Chapter.
  • Turn bulb holder -1- in -direction of arrow- to unlock, then pull it out of number plate light.

Installing

Install in the reverse order of removal, observing the following:

  • Test functionality.
Removing and installing bulb for number plate light -X4-/-X5-

Test yourself

A quick Volkswagen Golf quiz: every answer comes with an explanation and a link to the manual page.