Electrical system

Removing and installing data bus diagnostic interface -J533-

~1min read
Note When renewing the control unit, select Renew function for the respective control unit in Guided fault finding or Guided functions mode → Vehicle diagnostic tester.

Removing

  • Unplug electrical connector -1- by reaching upwards behind pedal bracket.
  • Press locking detent to disconnect and pull off connectors.
  • Disengage catches -arrows-.
  • Pull data bus diagnostic interface -J533--3- downwards off bracket -2-.

Installing

Install in the reverse order of removal, observing the following:

Specified torques

→ Chapter „Assembly overview - data bus diagnostic interface“

Removing and installing data bus diagnostic interface -J533-

Test yourself

A quick Volkswagen Golf quiz: every answer comes with an explanation and a link to the manual page.