General body repairs, exterior

Removing and installing exterior mirror

~1min read

Special tools and workshop equipment required

Torque wrench -V.A.G 1783-
Torque wrench -V.A.G 1783-

Note Removal and installation are described only for the left exterior mirror. The right side is similar.
Removing and installing exterior mirror

Removing

  • Remove front door trim → General body repairs, interior; Rep. gr.70.
  • Unclip cover -3- detaching adhesive tape -4- while doing so.
  • Remove loudspeaker → Electrical system; Rep. gr.91.
  • Reach through opening in loudspeaker, and disconnect connector -8- for exterior mirror-1-.
  • Unscrew bolts -5- from exterior mirror -1-.
  • Remove control unit for door, and detach clip -7- installed behind it -arrows-.
  • Thread electric wire -6- through hole in door, and remove exterior mirror -1-.

Installing

Install in the reverse order of removal observing the following:

  • If adhesive tape of clip are damaged, remove cover.
  • Then check function.

Specified torques

Bolts → Item

Test yourself

A quick Volkswagen Golf quiz: every answer comes with an explanation and a link to the manual page.