Volkswagen Golf Quiz
Electrical system

Removing and installing rear senders

In this manual: Electrical system
General body repairs, exterior — 230General body repairs, interior — 279General information, paint — 133Vechile- specific paint information — 27Heating, air conditioning — 156Auxiliary heater — 58Air conditioning system with refrigerant R134a — 1297- speed dual clutch gearbox 0CW — 544- cylinder injection engine(1.4 1 direct inction. turbocharger) — 182Fuel supply system - Petrol engines — 59Running gear, axles, steering — 221Brake system — 92Wheels and Tyres guide — 12Guide for using trailers — 11Wheels and Tyres Guide - General Information — 121Brake system (hybrid) — 73Electrical system — 326Communication — 65Electrical system, general information — 111
~1min read

Removing

  • Remove rear wheel housing liner → General body repairs, exterior; Rep. gr.66.
  • Press both locking lugs in direction of arrow -A- while at the same time pressing in sender -1- as far as stop.
  • Disconnect electrical connector -2-.

Installing

Install in the reverse order of removal, observing the following:

Note When inserting the sender in the sender retainer, make sure that the isolation ring (black silicone ring) is seated correctly on the sender head. Both locking lugs of sender retainer must audibly engage when installing the sender.
Removing and installing rear senders

Test yourself

A quick Volkswagen Golf quiz: every answer comes with an explanation and a link to the manual page.