Electrical system

Removing and installing turn signal

~1min read

Special tools and workshop equipment required

Torque wrench -V.A.G 1783-

Note Removal and installation are described for the left side. Removal and installation on the right side are carried out in the same way.

If the event of a defective LED, the turn signal repeater needs to be renewed.

Removing

Removing and installing turn signal
Removing and installing turn signal
  • Remove mirror cover → General body repairs, exterior; Rep. gr.66.
  • Disconnect electrical connector -4-.
  • Remove bolts -3-.
  • If present, release retaining tab.
  • Remove turn signal -2- upwards from mirror mounting -1-.

Installing

Install in the reverse order of removal, observing the following:

  • Test functionality.

Specified torques

Bolts → Item.

Test yourself

A quick Volkswagen Golf quiz: every answer comes with an explanation and a link to the manual page.