Volkswagen Golf Quiz
Electrical system, general information

Repairing threaded connections

In this manual: Electrical system, general information
General body repairs, exterior — 230General body repairs, interior — 279General information, paint — 133Vechile- specific paint information — 27Heating, air conditioning — 156Auxiliary heater — 58Air conditioning system with refrigerant R134a — 1297- speed dual clutch gearbox 0CW — 544- cylinder injection engine(1.4 1 direct inction. turbocharger) — 182Fuel supply system - Petrol engines — 59Running gear, axles, steering — 221Brake system — 92Wheels and Tyres guide — 12Guide for using trailers — 11Wheels and Tyres Guide - General Information — 121Brake system (hybrid) — 73Electrical system — 326Communication — 65Electrical system, general information — 111
~2min read

Special tools and workshop equipment required

VAG 1331

Note The use of penetrating fluid, contact spray or grease etc. is prohibited since the missing adhesion in the threads may cause a torque excess and, therefore, the break of the threaded connection. The grey sanding pads are suitable for light dirt and "soft surfaces". The red sanding pads are suitable for heavy dirt and "hard surfaces".
WARNING

Danger of injury! Observe warning notices and safety regulations → Chapter!
  • Disconnect battery.
Repairing threaded connections
  • Loosen cap nut and remove ring terminal from threaded connection.
  • Check threaded connection for corrosion, dirt etc.
  • Select suitable adapter and suitable sanding pad for threaded connection.
Caution Take care not to abrade excessively the tin coating and ensure that the copper does not appear. This could produce a galvanic cell which destroys metal and causes faulty repair.
Note As the thickness of the tin coating may differ according to the design, the cleaning process must be performed step by step and a visual check of the ring terminal is necessary between the steps.
Repairing threaded connections
  • Set adapter on threaded connection and grind off corrosion and dirt with circular movements.
  • Check threaded connection and regrind if necessary.
  • Tighten connection and, if necessary, locating element again to specified torque → Current flow diagrams, Electrical fault finding and Fitting locations.
Note Optimum contact is ensured when the components to be secured are tightened to the specified torque after cleaning.
  • Apply suitable anti-corrosion treatment to threaded connection → Chapter.
  • Reconnect battery.
WARNING

Danger of injury! Observe warning notices and safety regulations → Chapter!
  • Teach in electric windows again, enter radio code, set clock and, if necessary, recode control units which emit code signals.
Repairing threaded connections

Test yourself

A quick Volkswagen Golf quiz: every answer comes with an explanation and a link to the manual page.