Volkswagen Polo Quiz
Wiring

6-Pin Universal Oxygen Sensor, Removing and Installing

In this manual: Wiring
General Paint Information — 128Towing Guide — 10Whels, Tires, Whel Alignment — 126Battery, Starter, Generator, Cruise Control — 65Windshield Wiper/ Washer System — 9Exterior Lights, Switches — 1Interior Lights, Switches — 7Wiring — 51Refrrigerant R134a Servicing — 134
~1min read
Note Use the faulty sensor as a guide for installing all of the accompanying attachments, cable ties or marking bands. Do not crimp or cut the wires otherwise the functionality of the heated oxygen sensor (HO2S) will be diminished.
  • Remove the old heated oxygen sensor (HO2S).
  • Lay both of the oxygen sensor next to each other so the sensor housings are the same level.
6-Pin Universal Oxygen Sensor, Removing and Installing
  • Tie the excess length of the sensor (approximately 50 to 250 mm) back so it is the same length as the faulty sensor and secure it with cable ties -1-.
  • Install the new oxygen sensor in the vehicle.
6-Pin Universal Oxygen Sensor, Removing and Installing

Test yourself

A quick Volkswagen Polo quiz: every answer comes with an explanation and a link to the manual page.