| Overview |
Page |
| A/C Service Station -VAS 6007A-. For additional A/C service stations. Refer to VAGWorkshop Equipment Catalog. |
→ Fig. „“ A/C Service Station -VAS6007A- (and further or current A/C service station)”“ |
| Electronic Leak Detector -VAG1796- |
→ Fig. „“ Electronic Leak Detector -VAG1796- ”“ |
| Leak Detection System -VAS6196- |
→ Fig. „“ Leak Detection System -VAS6196- ”“ |
| Leak Detection System - R-134a/PAG single dose Tracer-Stick® capsules -VAS6196/1- |
Not illustrated |
| Leak Detection System -VAS6201- or succeeding model |
→ Fig. „“Leak Detection Kit VAS6201A or succeeding model”“ |
A/C Service Station -VAS6380- with flushing device or Air Conditioning Flush Tool -VAS6337- other A/C service station. Refer to VAGWorkshop Equipment Catalog. With installed program to flush refrigerant circuit with refrigerant R134a. |
Not illustrated |
| Current flushing device Air Conditioning Flush Tool -VAS6337/1A-. Refer to the VAGWorkshop Equipment Catalog. For flushing refrigerant circuit with refrigerant R134a. To be used also with older A/C service stations (flushing procedure must then be performed manually) with a reservoir volume of at least 10 kg of refrigerant R134a. |
→ Fig. „“ Air Conditioning Flush Tool -VAS6337/1A- from the company Behr or succeeding model”“ |
| Current flushing device Refrigerant Circuit Flushing Device -VAS6336/1-. Refer to the VAGWorkshop Equipment Catalog. For flushing refrigerant circuit with refrigerant R134a. To be used also with older A/C service stations (flushing procedure must then be performed manually) with a reservoir volume of at least 10 kg of refrigerant R134a. |
→ Fig. „“ Air Conditioning Flush Tool -VAS6336/1- from the company Waeco or succeeding model”“ |
| VW/Audi passenger vehicle set adapter chest VAS6338/1 for refrigerant circuits with refrigerant R134a. For connecting the A/C service station to the refrigerant circuit and bridging certain components when flushing with refrigerant R134 or compressed air and nitrogen. |
Not illustrated |
| Commercial vehicle set adapter chest VAS6338/50 for refrigerant circuits with refrigerant R134a. For connecting the A/C service station to the refrigerant circuit and for bridging certain components when flushing. |
Not illustrated |
Ultrasound A/C Cleaner -VAS6189B- For eliminating unpleasant odors caused by A/C system. |
Not illustrated |
Suction Feed Spray Gun -VAG1538- Spray nozzle VAG 1538/5 (short)
Spray nozzle VAG 1538/6 (long)
Spray nozzle VAG 1538/7 (700 mm, commercial vehicle)
Cleaning solution D 600 100 A1
Cleaning solution for evaporator D 600 100 A2
To remove unpleasant odors from the evaporator |
Not illustrated |
Release Tool -VAS6127- case For opening refrigerant pipes. |
→ Fig. „“ Spring Lock Release Tools -VAS6127A- case consists of the Release Tool -VAS6127/1A-Release Tool -VAS6127/2A- and Release Tool -VAS6127/3- ”“ |
Release Tools -VAS6127/1-3- For opening refrigerant pipes. |
→ Fig. „“ Release Tool -VAS6127/1-Release Tool -VAS6127/2- ”“ |
Magnetic Coupling Tool -VAG1616- For clutch plate (A/C compressor manufactured by “Sanden”). |
→ Fig. „“ Magnetic Coupling Tool -VAG1616- for clutch plate (for Sanden A/C compressors)”“ |
| Magnetic Coupling Tool Puller -VAG1616/1- for the magnetic coupling (Sanden A/C compressor). |
→ Fig. „“ Magnetic Coupling Tool Puller -VAG1616/1- (for Sanden A/C compressors)”“ |
| A/C Clutch Set -VAG1719- (Zexel A/C compressor). |
→ Fig. „“ A/C Clutch Set -VAG1719- (for Zexel A/C compressors)”“ |
| A/C Adapter Set -VAG1785/1-10- R134a. |
→ Fig. „“ A/C Adapter Set -VAG1785/1-10- ”“ |
| Combined fine filter unit for compressed-air system (oil, dirt and water separator as used for painting facilities). Refer to catalog workshop equipment. |
Not illustrated |
| O-ring seals. Refer to the Parts Catalog. |
Not illustrated |
| Refrigerant oil. Refer to the Parts Catalog. |
Not illustrated |
| Refrigerant Sockets -T10364- for high pressure/low pressure side service connection valves on refrigerant circuit. |
→ Fig. „“ Refrigerant Sockets -T10364- for the high pressure/low pressure side service connection valves in the refrigerant circuit”“ |
| Overview |
Page |
| Fin comb |
→ Fig. „“Fin comb”“ |
| 5/8" - 18 UNF charging hoses with valve opener. |
→ Fig. „“Charging hoses”“ |
| Connection piece for refrigerant cylinder and seal with quick-release coupling connection or threaded connection 5/8" - 18 UNF. |
→ Fig. „“Connection piece for refrigerant cylinder and seal with quick-release coupling connection or threaded connection 5/8" - 18 UNF.”“ |
| Valve caps 5/8"-18 UNF. |
→ Fig. „“Valve caps with spare seals (for 5/8"-18 UNF thread)”“ |
| Pressure gauge set with pressure reducer for nitrogen. |
→ Fig. „“Pressure gauge set with pressure reducer for nitrogen (max. reducing pressure: 15 bar (218 psi))”“ |
| Quick-release coupling adapter for service connections (quantity: 2) included in scope of delivery of A/C service station. |
→ Fig. „“Quick-release coupling adapter for service connections”“ |
| The wrench size depends on the threaded connections on the refrigerant lines. |
Not illustrated |
| Valve opener for charging hoses. |
Not illustrated |
| Connecting nipple for conical seal 5/8"-18 UNF. |
Not illustrated |
| Compressed-air gun with rubber mouthpiece. |
Not illustrated |
| Hand shut-off valve 5/8"-18 UNF. |
Not illustrated |
| Recycling container for refrigerant R134a. |
Not illustrated |
| Digital thermometer |
Not illustrated |
| Protective gloves |
Not illustrated |
| Protective glasses |
Not illustrated |
| Refrigerant R134a with cylinder (capacity as required). |
Not illustrated |
| Nitrogen with compressed gas cylinder. |
Not illustrated |
| Band wrench (oil filter) as counterhold for ribbed belt pulley. |
Not illustrated |
Note This list outlines the testers, tools and materials required for expert refrigerant circuit repair work. 
Caution Non-approved tools or materials such as leak sealing additives can cause damage or malfunctions in the system. 
