General Paint Information
Industrial Dirt Remover
In this manual: General Paint Information
~1min read
Definition:Industrial Dirt Remover -ABS 600 000 10-Edition 05/2004Product DescriptionIndustrial Dirt Remover -ABS 600 000 10- is used to remove surface rust (metal dust) from the vehicle body. The product is used undiluted.
Application Instructions Note Before starting to apply, it is necessary to read the safety measures and advice in the safety data sheet. Even for products which are not required to be labeled by law, the usual safety measures must be observed for chemical emissions. Application/ProcessingDuring application, observe the following:The temperature of the cleaner and vehicle body must not exceed 25 °C (do not expose the vehicle and product to direct sunlight). After washing the vehicle, the product is applied to the vehicle body using a brush or sponge. Let the product work for approximately 10 minutes (do not increase the exposure time, otherwise the paint or plastic parts may corrode). Do not dry the product.Rinse and wash the body/vehicle with plenty of water.If the vehicle is still not clean after one use, repeat the cleaning procedure.Characteristics |
| Chemical composition | Highly-effective cleaning combination out of organic and inorganic acids, surface-active agents and water. |
| Color | Water-clear, transparent/clear, colorless fluid |
| pH value | 1 |
| Density at 15 °C | EN ISO 12185 1.076 ± 0.015 g/ml |
StorageThe guaranteed shelf life of 36 months from date of manufacture. Use no later than the date indicated on the label and store in original container at +15 °C to +30 °C. |
![]() |
Test yourself
A quick Volkswagen Polo quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?
Caution
Note Before starting to apply, it is necessary to read the safety measures and advice in the safety data sheet. Even for products which are not required to be labeled by law, the usual safety measures must be observed for chemical emissions. 