Instrument overview

Fig. 10 Instrument cluster in the dash panel: type 1

Fig. 11 Instrument cluster in the dash panel: type 2

Descriptions of the instruments or :

1. 1
   

   Rev. counter (running engine speed in revolutions x 1,000 per minute).

   The start of the red zone on the dial indicates the maximum engine speed that may be used in each gear when the engine is warm and after it has been run in properly. You should change up a gear or move the selector lever to D (or lift your foot off the accelerator) before the needle reaches the red zone .

2. 2
   Displays .
3. 3
   Speedometer
4. 4
   Setting button for the clock ¹⁾.
5. 5
   

   Reset button for the trip recorder display (trip).

   • Press the button to reset to 0.
6. 6
   Engine coolant temperature display or Autogas fuel tank display in vehicles with autogas engine .
7. 7
   Fuel gauge .

NOTICE

• When the engine is cold, avoid high engine speeds, driving at full throttle and overloading the engine.

• The needle on the rev counter should only briefly point into the red area, as engine damage may otherwise be incurred.

Changing up a gear early will help to save fuel and minimise engine noise.

The fuel gauge is located in the lower field of the display or in the speedometer .

¹⁾ In some versions of the vehicle, it may be possible to adjust the clock settings using the Settings menu on the instrument cluster display .