Overview - Wheel, RAX

1 -

Wheel

Installing the wheel. Refer to → Chapter „Wheel, Mounting“.

2 -	Wheel Bolts

There are different versions. Refer to → Chapter „Wheel Bolts“.

3 -

PAX Tires

Side Wall Lettering. Refer to → Chapter „Run-Flat Tire (PAX), Lettering On Side Wall“.

4 -	Support Ring

5 -	Wheel for PAX Tires

Note assembly instructions. Refer to → Chapter „Tires, Mounting“.

6 -	Metal Valve Body

Refer to the Parts Catalog for the allocation of the only valves to be installed.

delivered complete

7 -	Wheel Electronics

Batteries must be completely replaced.

Remaining battery life, temperature and pressure can be read via diagnosis with Vehicle Diagnostic Tester. Beru wheel electronics system. Refer to → Chapter „Beru Wheel Electronics Tire Pressure Monitoring Sensor, Removing and Installing,“. Siemens wheel electronics system. Refer to → Chapter „Siemens Wheel Electronics Tire Pressure Monitoring Sensor, Removing and Installing“.

8 -	Adhesive Balancing Weights

Maximum 60 grams per rim permitted

Clean wheel where it will be adhered so it is free of dirt and grease

Remove protective film.

Attach balance weights to intended surfaces.

9 -	Anti-Theft Wheel Bolts

Note assembly instructions. Refer to → Chapter „Wheel Bolts“.

Operating. Refer to → Fig. „“Anti-Theft Wheel Bolts”“

10 -	Adapter for the Anti-Theft Lockable Wheel Bolt

Place on wheel bolt. Refer to → Fig. „“Anti-Theft Wheel Bolts”“

11 -	Anti-Theft Wheel Bolt Cap

12 -	Wheel Bolt Cap

13 -	Wheel Bolts

Note

Make sure the correct wheel bolts are installed. Refer to the Parts Catalog.

Note assembly instructions. Refer to → Chapter „Wheel Bolts“.

14 -

Hub Cap

Removing and Installing. Refer to → Chapter „Hub Cap for Alloy Wheels with Open Threaded Connection, Removing and Installing“.