Roll-back function for the electric windows

First read and observe the introductory information and safety warnings

The roll-back function for the electric windows can reduce the risk of injuries when the windows are closing . If the one-touch closing function for a window does not work because it is stiff or is being obstructed, the window will automatically open again.

• Check to see why the window has not closed.

• Try to close the window again.

• If the window is again prevented from closing within approximately 10 seconds of the first attempt because it is stiff or obstructed, the automatic closing function is switched off for approximately 10 seconds.

• If the window is still obstructed, the window stops at this point. To close the window without the roll-back function, press the button again within 10 seconds .

Closing the window without the roll-back function

• Try to close the window again within approximately 10 seconds by holding the button. The roll-back function will be deactivated for a small section of the path of the closing window.

• If the closing procedure takes longer than approximately 10 seconds, the roll-back function will be reactivated. The window will then stop again if it is stiff or meets another obstacle.

• Please go to a qualified workshop if the window still cannot be closed.

Closing the electric windows without the roll-back function could lead to severe injuries.

• Always take care when closing electric windows.

• Ensure that nobody obstructs the path of the electric windows, especially if the roll-back function is not active.

• The roll-back function does not prevent fingers or other body parts from being pressed against the window frame and sustaining injury.

The roll-back function is also activated if the windows are closed using the vehicle key for convenience closing .