Battery, Starter, Generator, Cruise Control

Warranty Test, Performing

~1min read

WARNING Do not check or charge batteries that have a visual indicator that is bright yellow. Jump starting must not be used!

There is a risk of explosion during testing, charging or jump starting.

These batteries must be replaced.

  • Select “Warranty Test”.
  • Select “inside the vehicle” or “outside of the vehicle”.
  • Select “at the battery pole” or “at the battery jump start terminal”.
  • Scan in the battery 2D code or manually select battery type and current strength.
  • Measure the temperature. Hold the temperature sensor approximately 5 cm above the battery pole until the temperature is stable.
  • Start the test.
  • Print out the test report if necessary.

Test yourself

A quick Volkswagen Polo quiz: every answer comes with an explanation and a link to the manual page.