Sockets in the vehicle

Fig. 124 In the luggage compartment: 12 Volt socket.

Fig. 125 Rear center console: 115 Volt socket.

Read and follow the introductory information and safety information first⇒Introduction to the subject

Maximum power draw

Socket	Maximum power draw
12 Volt	120 watts
115 Volt	150 watts (300 watt peak consumption)

The maximum power draw at any one socket must never be exceeded. Electrical devices should have information on them that says how much power they draw.

If 2 or more electrical devices are connected at the same time, the total power draw of all connected devices must never be more than 190 watts ⇒ .

12 Volt socket

The 12 Volt socket works only when the ignition is switched on.

If the ignition is on but the engine is not running, the vehicle battery will be drained by any device that is plugged in and turned on. For this reason, never use the electrical sockets unless the engine is running.

To help prevent damage from voltage fluctuations, switch off all electrical devices connected to a 12 Volt socket before switching the ignition on or off or starting the engine.

The vehicle may have 12 Volt sockets at the following places:

• In the storage compartment or in the front center console.

• In the storage compartment in the front center armrest.

• In the rear center console.

• In the luggage compartment.

115 Volt socket

The socket can only be used if the engine is running ⇒ .

Connecting an electrical device: Insert the plug as far as it goes into the socket in order to unlock the integrated child-proof lock. There is electricity in the socket only after the child-proof lock is unlocked.

LED display on the socket ⇒ Fig. 125
Green continuous light:	The child-proof lock is unlocked. The socket is operational.
Red flashing light:	Malfunction such as over-current or overheating cutoff

Temperature shutoff

The inverter in the 115 Volt socket shuts off automatically above a certain temperature. The shutoff prevents overheating in case of excessive power consumption of connected devices or at high ambient air temperatures. The inverter switches back on automatically after a cool-down period. Connected devices which were left switched on come back on again. For this reason, switch off connected electrical devices if the inverter switches off due to overheating.

Danger!

High voltage in the electrical system!

• Never spill liquids on the socket. Improper use of a volt socket can cause electrical shock, burns, and other serious personal injuries.

• Do not connect adapters or extension cords to the 115 Volt socket. Otherwise, the integrated child-proof lock is switched off and the socket is live.

• Do not stick objects, such as knitting needles, into the contacts of the 115 Volt socket.

• Follow the manufacturer's instructions for connected devices!

• Never exceed the maximum power consumption, or the entire vehicle electrical system may be damaged.

• 12 Volt socket:
  • Only use equipment that has been tested for electromagnetic compatibility and complies with applicable guidelines.
  • Never feed current into the socket, with a solar panel, for example.

• 115 Volt socket:
  • Do not connect devices or plugs which are too heavy, such as a grid power supply adapter or cord, directly onto the socket.
  • Do not connect lamps containing neon tubes.
  • Only connect devices to the socket whose voltage is consistent with the voltage of the socket.
  • For devices with a high starting current, the integrated over-current shutoff will prevent them from being switched on.

Some devices may not work very well when connected to the 115 Volt socket due to low wattage.

Unshielded devices may interfere with radio reception or the vehicle's electrical system.

Applicable only in Canada