Washer Fluid Line Hose Connections

Windshield and Rear Window Washer System

The following hose connection types are used for connecting hoses to pumps and spray nozzles or as separating points

• To loosen the connection, pulling both halves of the coupling apart.
• To secure the connection, push both halves of coupling together until felt and heard to engage.

• To loosen the connection, turn the securing clip -1- 90º -arrow- and then pull the hose connection off.
• To secure the connection, attach the hose connection and turn the securing clip -1--arrow- until it engages.

• To loosen the connection, lift the securing clip -1- approximately 1 mm -arrow- and then remove the hose connection.
• To secure the connection, attach the hose connection and press in the securing clip -1- until it engages.
• To secure the connection, attach the hose connection and press in the securing clip -1- until it engages.

• To loosen the connection, pull the securing clip upward -1--arrow- and remove the hose connection.
• To secure the connection, attach the hose connection and press in the securing clip -1- until it engages.

Headlamp Washer System

The following hose connection types are used for connecting hoses to pumps and spray nozzles or as separating points

• Disconnect by depressing clip -1--arrow- and then separating coupling from jet.
• Reconnect by keeping clip -arrow- depressed while pushing coupling onto jet until it engages. Check securing clip for secure locking by attempting to pull it off without depressing clip.