Do it yourself
Wheel cover
In this manual: Do it yourself
~1min read

Fig. 190 Pulling the wheel cover off.
Read and follow the introductory information and safety information first⇒
Introduction to the subject Pulling off the wheel cover
- Take the lug wrench and wire clip out of the vehicle tool kit ⇒ Vehicle tool kit .
- Place the wire clip hook in one of the openings of the wheel cover.
- Slide the lug wrench through the clip ⇒ Fig. 190 and pull the wheel cover off in the direction of the arrow.
Installing the wheel cover
Before installing the wheel cover, the anti-theft wheel bolt must be screwed into position ⇒ Fig. 193② or ③. Otherwise, the wheel cover cannot be installed.
Make sure that the valve cutout is aligned with the valve ⇒ Fig. 193① , and press the wheel cover onto the wheel rim. Make sure that the wheel cover is latched onto the rim along the entire circumference.
Test yourself
A quick Volkswagen Tiguan quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?