Volkswagen Touran Quiz
Heating, Ventilation and Air Conditioning

A/C System and Refrigerant R134a Safety Precautions

In this manual: Heating, Ventilation and Air Conditioning
General Paint Information — 130Towing Guide — 4Wheel and Tire Guide Information — 111Electrical System — 104Heating, Ventilation and Air Conditioning — 106
~2min read

A/C Service Station -VAS6007A- (and further or current A/C Service Station)

Refer to the Workshop Equipment Catalog.

WARNING

It is recommended to have an eye-flushing bottle available.

If liquid refrigerant has come in contact with your skin and eyes, immediately flush with cool water for 15 minutes. Afterwards instill eye drops and consult a doctor immediately, even when the eyes are not hurting. The doctor must be informed that the injury was caused by refrigerant R134a. Should refrigerant come into contact with other parts of the body despite compliance with safety regulations, these must likewise be rinsed immediately for at least 15 minutes with cold water. Work on refrigerant system should only be performed in ventilated areas (workshops). Turn on the exhaust gas ventilation system Refrigerant must not be stored in low-lying areas such as cellars or in their entry ways or windowsills.
Do not attempt repair on filled air conditioning systems by soldering, brazing or welding. This applies also for welding and soldering work on the vehicle, in the event that parts of the A/C system may heat up. When performing paintwork repairs, the temperature in the drying booth or preheating zone must not exceed 80 C (176 F).

Reason:

Exposure to heat increases the pressure in the system, which could cause the pressure relief valve to open.

Corrective measure:

Discharge refrigerant circuit with A/C service station.
Note Always replace damaged or leaking A/C system components. Do not attempt to repair them by soldering, brazing or welding. Refrigerant containers (for example, charging cylinders of A/C service station) must never be subjected to excessive heat or exposed to direct sunlight.

Corrective measure:

Vessels must never be completely filled with liquid refrigerant. Without sufficient room for expansion (gas cushion), vessels will rupture with devastating effect in the event of an increase in temperature. Refer to → Chapter "Refrigerant R134a Characteristics".
Refrigerant is never to be transferred to systems or vessels in which air is present.

Corrective measure:

Evacuate systems and vessels before charging with refrigerant.
A/C System and Refrigerant R134a Safety Precautions

Test yourself

A quick Volkswagen Touran quiz: every answer comes with an explanation and a link to the manual page.