Volkswagen Touran Quiz
General Paint Information

Adhesive Surface Pretreatment when Replacing Laser-Soldered Roofs

In this manual: General Paint Information
General Paint Information — 130Towing Guide — 4Wheel and Tire Guide Information — 111Electrical System — 104Heating, Ventilation and Air Conditioning — 106
~1min read
Dry sand the cataphoretic primer on the roof adhesive surface -item 6- → Item down to the bare metal using P180 sandpaper.
Adhesive Surface Pretreatment when Replacing Laser-Soldered Roofs
Dry sand the roof pillar adhesive surface -item 6- → Item down to the bare metal using P180 sandpaper.
Note Prime the sanded-through areas outside of the body adhesive -item 6- → Item with Two-Part Wash Primer - LHV 043 000 A2- and then fill with Two-Part HS Performance Filler.
Clean the adhesion area with Silicone Remover.
Replace the roof. Refer to → Body Exterior; Rep. Gr.51.
Adhesive Surface Pretreatment when Replacing Laser-Soldered Roofs
Adhesive Surface Pretreatment when Replacing Laser-Soldered Roofs
1 - Two-Part Window Adhesive
2 - Roof
3 - Glass/Paint Primer
4 - Two-Part Body Adhesive
5 - Roof Pillar/Side Panel
6 - Sanded-Down Bare Metal Area

Test yourself

A quick Volkswagen Touran quiz: every answer comes with an explanation and a link to the manual page.